Passer aux informations produits
1 de 2

R-Guard Joint and Seam Filler

R-Guard Joint and Seam Filler

(0)
Prix habituel $34.35 CAD
Prix habituel Prix promotionnel $34.35 CAD
En vente Épuisé

 

Prosoco Joint and Seam Filler for Fast Flash Cat 5

Covers 38-60 ft per sausage.

Joint & Seam Filler is part of the family of PROSOCO R-GUARD® products developed to prevent the unwanted movement of water and air through building envelopes. Utilize Joint & Seam Filler to prepare open joints, seams and cracks before installing R-GUARD FastFlash; any R-GUARD Primary Air & Water-Resistive Barrier; or other waterproofing and air barrier components in new or existing wall assemblies.

Joint & Seam Filler is a high modulus, gun-grade crack and joint filler, adhesive and detailing compound that combines the best of silicone and polyurethane properties. This single-component, fiber-reinforced, Silyl-Terminated-Poly-Ether (STPE) is easy to gun, spread and tool.

Use Joint & Seam Filler to fill openings and create transitions where flexible reinforcement is required to bridge gaps and provide continuous support of fluid-applied flashing membranes, waterproofing or air barrier components.

Suitable for all climates, Joint & Seam Filler bonds directly to damp or dry surfaces and cures under a variety of weather conditions. It dramatically reduces surface preparation time by eliminating the need for reinforcing tapes at sheathing joints, inside and outside corners.

Use Joint & Seam Filler as part of a building wide PROSOCO R-GUARD® Air & Water Resistive Barrier system, or to prepare surfaces for conventional waterproofing or air barrier components.

Appropriate for vertical or horizontal, above-grade applications to concrete, masonry, natural stone, structural sheathing, architectural metals, painted metals, glass, PVC, FRP, EPDM and most other building materials.

Advantages:

  • Streamlines preparation by eliminating the need for joint reinforcing tapes.
  • Silane functional polymer provides superior long term adhesion, crack filling and weathering characteristics.
  • Bonds to most common building materials without priming.
  • Single component formulation saves time and requires no mixing.
  • Fills open joints and seams up to 1/2 inch (13 mm).
  • Bonds and cures in wet weather and on damp substrates. Tolerates rain immediately after application.
  • Compatible with most urethane, silicone, and acrylic sealants and coatings.
  • No shrinkage, staining, or yellowing.
  • Breathable - allows damp surfaces to dry.
  • Will not support mold growth.
  • Cured service temperatures from -75 to 400 degrees F.
  • Positively screened for successful performance under ASTM-E-84.

Load up the Joint and Seam Fill sausage bag into the Dripless ETS 600 Sausage Gun to apply and use R-Guard Fast Flash Spreader to spread into a thin layer.

For a more detailed description, videos, and images please visit PROSOCO's page:  

http://www.prosoco.com/AirBarriers

 Prosoco R-Guard Joint & Seam Filler TDS

Afficher tous les détails

Avis des clients

0 sur 5 Basé sur 0 avis
 
0
 
0
 
0
 
0
 
0

Écrire un avis